Caller Display with POTS

[NicolasR]

From 2.1_31 to 3.0_67 the CLIP doesn't work with analogue Phones.

We've experienced this issue with Siemens Gigaset, Alcatel Temporis and all the phones of the french market.
I think this is not the "french exception" but a real problem.

When Caller Display enabled,
On external and internal incoming call,
the phone rings with 5 to 8 seconds of delay and without any number or name presented !!!!

Do somebody have an idea ?

PS : according to AVAYA french local setting (fra) CLIP when ON is set to FSKD.

 

[sizbut]

Have your tried changing it from 'On' to beign the actual signalling method that your service provider provides, eg. FSKD?

 

[NicolasR]

Yes, we have.
And the ame issue. The phone rings after 5 sec of delay.
There are multiple cases esclalated to AVAYA in relation with this problem.

Today 2 solutions :

Downgrade phone modules to 2.1_27 and prior
Upgrade phonbe modules to 3.1_23 or 3.1_29

With 3.0_68, the FSK well works during few days and stops working after a certain time.

 

[sizbut]

?Where are you getting your binaries from, 59 was the August maintenance release, you've just switched to 67 and then 68. If you have trial software surely you should be directing issue to the source provider.