Callback on DPNSS

[jazaya]

Hi All:
We have connected two BC7 and BC9 system using DPNSS.
every thing is ok,except Callback features it just doesnot work!!!.display on dig phones shows command executed but i just doesnot work!!!.
howevever internal callback works fine.
Is anyone aware of incampatibility of BC7 andBC9 in this regards?
Thanks

Experience it, there is no substitute.
RemoveThisJazayeri@kiasagroup.com

 

[SYAR2003]

First ,you must use closed numbering plan .
Also use node id.
Parnum 123 must be version 1 in all pbx's .

 

[djudjuman]

To jazaya

I can't get DPNSS BC7 to BC11 to work (BC11 to BC7 OK)

Please give me your ROCAP, RODAP and RODDP for BC7 and BC9

Rgds

 

[jazaya]

To Syar:
We use close numbering plan.
To DJU....:
I said Bc7 to BC9,not BC11.
Thanks for replies

Experience it, there is no substitute.
RemoveThisJazayeri@kiasagroup.com

 

[djudjuman]

To Jazaja

I know that you use BC7 to BC9.
I use BC7 to BC11.
I am still interested in your configuration between BC7 and BC9. May be it will give me some idea's for my problem.
Thanks in advance. (Than I call test the call back too)

Rgds