call transfer

[mabar]

Hi need help if anybody can supply me the pbx command for the following.

A customer would like to retain the toll free fax number but need to transfer to an efax number after 1 ring.

Can anybody give me the command to do so.

 

[rfpui]

My proposal
Personal deflection

Example where aaaa means fax number and bbbb means efax number.

PELPIIR=aaaa,LIST=1,CHO=1,ANSPOS=aaaa,TIME=2;
PELPIIR=aaaa,LIST=1,CHO=2,ANSPOS=bbbb;


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[mabar]

hi rfpui,

Thanks for the tip. I assume this command works on ericsson MD110. my apologies as I'm new to voice and learning commands direct from the manual.

 

[whosrdaddy]

maybe it is usefull to know what version of PBX you have.

can you provide us the printout of the CADAP; command?

-----------------------------------------------------
What You See Is What You Get
Never underestimate tha powah of tha google!

 

[lalrl]

Sorry, I don't understand the sense of this scenario. Why not to make directly:

PELPIIR=aaaa,LIST=1,CHO=1,ANSPOS=bbbb,time=60;

 

[rfpui]

where you see this scenario?


----------------------------------
If anything can go wrong, it will.
(Murphy's Law)

 

[mabar]

Hi All,

I really appreciate your tips. Just to give you further detail the 1800 number will retain except that when a customer send a fax to the 1800 number, it will be routed to the efax number. but when I check the PELPI command, isn't this for DECT phones only. how about analog like command? any ideas

 

[lalrl]

Do I understand right? If a normal call comes, the Phone should ring and when a Fax comes, then it should be rerouted?

And what do you mean with 1800 number. Do you mean a DCT1800-Dect-Phone?