Call Transfer Restriction

[HILORD]

Could you tell me how I can restrict(exstension or route) my subscribers do not make an external call trasfer (for example 123 456789 and 987 654321 are numbers of two mobile operators and subscribers shuldn't be possible to make a transfer between them).Take in mind that subscribers should keep their possibilities to dial the two mobile operators.

 

[rfpui]

Hi
I thing that you must use traffic connection matrix to set restriction.
If You wont more help send printout
ROCAP:ROU=X&Y ; */ X is a route number of mobile operator A and Y operator B */
EXCCP;
TCMAP;

 

[HILORD]

Thanks rfpui for your replay,
take in mind that I have only one route and my subscribers have only digital extensions.
I send you requested data:


<ROCAP:ROU=20;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
20 713000000100001 5 3110000001 0 30 128 03151515 211100000031 111111

END

<KSCAPIR=4501;
KEY SYSTEM CATEGORY PRINT
DIR TRAF SERV CDIV ROC ITYPE TRM ADC LANG
4501 03040415 000212070 011151111 000001 20 0 10110113010 F

END

<EXCCP:CAT=ALL;
EXTENSION CATEGORY CODE
CAT TRAF SERV CDIV ROC
0 00000000 000000000 000000000 000001
1 03040415 000212070 011151111 000001
2 03040415 100212070 011151111 000001
3 00000000 000000000 000000000 000001
4 00000000 000000000 000000000 000001
5 03151515 000212010 011151111 000001
6 00000000 000000000 000000000 000001
7 00000000 000000000 000000000 000001
8 00000000 000000000 000000000 000001
9 00000000 000000000 000000000 000001
10 00000000 000000000 000000000 000001
11 00000000 000000000 000000000 000001
12 00000000 000000000 000000000 000001
13 00000000 000000000 000000000 000001
14 00000000 000000000 000000000 000001
15 00000000 000000000 000000000 000001
16 00000000 000000000 000000000 000001
17 00000000 000000000 000000000 000001
18 00000000 000000000 000000000 000001
19 00000000 000000000 000000000 000001
20 00000000 000000000 000000000 000001
21 00000000 000000000 000000000 000001
22 00000000 000000000 000000000 000001
23 00000000 000000000 000000000 000001
24 00000000 000000000 000000000 000001
25 00000000 000000000 000000000 000001
26 00000000 000000000 000000000 000001
27 00000000 000000000 000000000 000001
28 00000000 000000000 000000000 000001
29 00000000 000000000 000000000 000001
30 00000000 000000000 000000000 000001
31 00000000 000000000 000000000 000001
32 00000000 000000000 000000000 000001
33 00000000 000000000 000000000 000001
34 00000000 000000000 000000000 000001
35 00000000 000000000 000000000 000001
36 00000000 000000000 000000000 000001
37 00000000 000000000 000000000 000001
38 00000000 000000000 000000000 000001
39 00000000 000000000 000000000 000001
40 00000000 000000000 000000000 000001
41 00000000 000000000 000000000 000001
42 00000000 000000000 000000000 000001
43 00000000 000000000 000000000 000001
44 00000000 000000000 000000000 000001
45 00000000 000000000 000000000 000001
46 00000000 000000000 000000000 000001
47 00000000 000000000 000000000 000001
48 00000000 000000000 000000000 000001
49 00000000 000000000 000000000 000001
50 00000000 000000000 000000000 000001
51 00000000 000000000 000000000 000001
52 00000000 000000000 000000000 000001
53 00000000 000000000 000000000 000001
54 00000000 000000000 000000000 000001
55 00000000 000000000 000000000 000001
56 00000000 000000000 000000000 000001
57 00000000 000000000 000000000 000001
58 00000000 000000000 000000000 000001
59 00000000 000000000 000000000 000001
60 00000000 000000000 000000000 000001
61 00000000 000000000 000000000 000001
62 00000000 000000000 000000000 000001
63 00000000 000000000 000000000 000001

MINIMUM CATEGORY CODE FOR AUTHORIZATION CODE IS 01
DEFAULT CATEGORY CODE FOR AUTHORIZATION CODE IS 01

END

<TCMAP;
TRAFFIC GROUP MATRIX DATA
CON = T B
A 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
14 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
15 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
CON = C B
A 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15
0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
3 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
4 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
5 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
6 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
7 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
8 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
9 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
10 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
11 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
12 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
13 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
14 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1
15 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1 1
END
<

 

[rfpui]

OK
Try this:
ROCAC:ROU=20,TRAF=03151514;
All calls from ROU=20 to ROU=20 can't be transfered

If You wont to have conference with external call
TCMAS:CON=C,A=14,B=14;

 

[aprasha]

An easier way is, with PARNUM 67 = 1, changing the ADC of the extension (D8 for digital, D7 for analog):

--------------------------------------
Authorization category for transfer of outgoing external calls:

0=>Not permitted to accept transferred or to transfer outgoing external calls. (Or if this feature is not used in the system)

1=>Permitted to transfer outgoing external calls.

2=>Permitted to accept transferred outgoing external calls.

3=>Both 1 and 2 above are permitted.

--------------------------------------

The problem is that, in this way, you would also cut the possibility of outgoing transfer of an internal call (and of course, you would have to verify that that digit of the ADC of all the rest of permited extensions is equal to 3).

Good luck!

 

[rfpui]

aprasha
Why an easier way is ADC changing?
It is solution to change ADC but it is not good idea.

1
If transfer external call will be blocked, useful function (option ) will be disable
For example secretary can’t be transfer outgoing call to boss

2
How do you want change all ADC?
KSCACIR=ALL,ADC=…….;?
If yes you must be sure that all ODN and ADN have this same ADC settings
If ACD group exist or somebody have number presentation restrict /or not/ ADC changing is not so easy

 

[aprasha]

Hi there rfpui!

The two points that you commented are mentioned above at the end of my post, and I agree it's not easier.

But...what to do if you only want to restrict external transfer to a few extensions? I was thinking about that when I posted.

That's why

See ya!!

 

[DUFQI]

aprasha
thats not the way someone should configure categories.
What do you think traffic connection matrix is made for.
Create a category with line to line not allowed in TRAF
and it will work.
Greetings
DUFQI