mellomel70
Programmer
I'm working with an ASP.Net 4.0 project, and I'm calling a stored procedure on a SQL 2008 64-bit server. When I call the stored procedure, I don't get an error message, but the stored procedure doesn't do anything. When I call the stored proc natively in SQL Management Studio, it works fine. I've walked through the code in the debugger, and all the parameters are getting the right values, so I don't really know what's going on here.
Here's my code:
And here's the stored procedure:
What should happen, at the very least, is the fields CLSDBY, CLSDDATE, COMPLETED, STATUS and WORKORDERSTATUSID should be modified in the database, but no modification takes place when the code is run via .Net. In looking at this, I noticed that there are two transactions, one in the .Net code and one in the T-SQL, so I tried removing them one at a time, first the one in the T-SQL, then the one in the .Net code. This had no effect. I also commented out the entire CURSOR section of the stored proc, since this isn't what I'm concerned with right now and I've had experiences with weird cursor behavior. Still no effect.
I really don't know what's going on here. Can anyone give me a suggestion as to where to look?
Thanks!
Here's my code:
Code:
UserID = MoveRow["UserID"].ToString();
string strSelect = "SELECT * FROM Tasks WHERE UserID = " + UserID + " AND ClsdDate IS NULL AND Task LIKE 'Employee Move - " + RequestItemName + "%'";
DataSet dsTrackit = new DataSet();
SqlConnection dsConn = new SqlConnection(ConfigurationManager.AppSettings["DSN_TRACKIT"]);
SqlTransaction tran = null;
SqlDataAdapter dsDataAdapter = new SqlDataAdapter(strSelect, dsConn);
SqlCommandBuilder dsCommandBuilder = new SqlCommandBuilder(dsDataAdapter);
dsDataAdapter.UpdateCommand = dsCommandBuilder.GetUpdateCommand();
dsDataAdapter.Fill(dsTrackit, "DelTasks");
DataTable dtTrackit = dsTrackit.Tables[0];
string DBString = ConfigurationManager.AppSettings["DSN_TRACKIT"];
using (SqlConnection conn = new SqlConnection(DBString))
{
try
{
conn.Open();
SqlDataAdapter da = new SqlDataAdapter("", conn);
tran = conn.BeginTransaction();
SqlCommand delTASKCommand = new SqlCommand();
SqlParameter TicketParam = null;
delTASKCommand.CommandType = CommandType.StoredProcedure;
delTASKCommand.CommandText = ConfigurationManager.AppSettings["TrackitDB"].ToString() + ".dbo.[rems_CloseIndivTask]";
foreach (DataRow row in dtTrackit.Rows)
{
TicketParam = new SqlParameter("@WO_NUM", SqlDbType.Int);
TicketParam.Value = Convert.ToInt32(row["WO_NUM"]);
delTASKCommand.Parameters.Add(TicketParam);
TicketParam = new SqlParameter("@REQUESTORID", SqlDbType.NVarChar, 6);
TicketParam.Value = System.Web.HttpContext.Current.Session["RequestorID"].ToString();
delTASKCommand.Parameters.Add(TicketParam);
TicketParam = new SqlParameter("@COMMENTS", SqlDbType.NVarChar, 4000);
TicketParam.Value = MoveRow["End_Comments"].ToString();
delTASKCommand.Parameters.Add(TicketParam);
delTASKCommand.Connection = conn;
//delTASKCommand.Transaction = tran;
da.InsertCommand = delTASKCommand;
da.AcceptChangesDuringUpdate = false;
da.Update(dtTrackit);
dtTrackit.AcceptChanges();
}
tran.Commit();
}
catch (System.Exception ex)
{
EmailUtils.ExceptionNotification(CallingPage, ex.Message, ex.StackTrace);
tran.Rollback();
throw ex;
}
finally
{
conn.Close();
}
}
And here's the stored procedure:
Code:
SET ANSI_NULLS ON
GO
SET QUOTED_IDENTIFIER ON
GO
CREATE PROCEDURE [dbo].[rems_CloseIndivTask]
@WO_Num as int,
@RequestorID as nvarchar(6),
@Comments as nvarchar(4000)
As
SET NOCOUNT ON
SET TRANSACTION ISOLATION LEVEL SERIALIZABLE
BEGIN TRANSACTION
--CLOSE THE TASKS RECORD USING THE USERID
UPDATE Tasks
SET CLSDBY = @RequestorID,
CLSDDATE = getdate(),
COMPLETED = getdate(),
STATUS = 'Completed',
WORKORDERSTATUSID = 2
WHERE WO_Num = @WO_Num
DECLARE @CursorVar1 CURSOR
SET @CursorVar1 = CURSOR LOCAL FAST_FORWARD
FOR
SELECT TEXTPTR(Descript), WOID
FROM Tasks
WHERE WO_NUM = @WO_Num
DECLARE @ptrval binary(16)
DECLARE @ptrval2 binary(16)
DECLARE @NewTaskNoteID AS int
OPEN @CursorVar1
FETCH NEXT FROM @CursorVar1 INTO @ptrval, @ptrval2
WHILE @@FETCH_STATUS = 0
BEGIN
UPDATETEXT Tasks.Descript @ptrval 0 0 @Comments
IF @Comments <> ''
BEGIN
SELECT @NewTaskNoteID = MAX(TaskNoteID)+1 FROM TaskNote
UPDATE TI_IdGenerator
SET NextIDValue = @NewTaskNoteID
WHERE [ID] = 46
INSERT INTO TaskNote
VALUES(@NewTaskNoteID, @Comments, @ptrval2, 0, NULL, 0, getdate(), @RequestorID, getdate(), @RequestorID)
END
FETCH NEXT FROM @CursorVar1 INTO @ptrval, @ptrval2
END
CLOSE @CursorVar1
DEALLOCATE @CursorVar1
IF @@ERROR = 0
BEGIN
COMMIT TRANSACTION
SET TRANSACTION ISOLATION LEVEL READ COMMITTED
END
ELSE
BEGIN
ROLLBACK TRANSACTION
SET TRANSACTION ISOLATION LEVEL READ COMMITTED
RETURN (1)
END
SET NOCOUNT OFF
RETURN(0)
GO
SET ANSI_NULLS OFF
GO
SET QUOTED_IDENTIFIER OFF
GO
What should happen, at the very least, is the fields CLSDBY, CLSDDATE, COMPLETED, STATUS and WORKORDERSTATUSID should be modified in the database, but no modification takes place when the code is run via .Net. In looking at this, I noticed that there are two transactions, one in the .Net code and one in the T-SQL, so I tried removing them one at a time, first the one in the T-SQL, then the one in the .Net code. This had no effect. I also commented out the entire CURSOR section of the stored proc, since this isn't what I'm concerned with right now and I've had experiences with weird cursor behavior. Still no effect.
I really don't know what's going on here. Can anyone give me a suggestion as to where to look?
Thanks!