Call Reroute.

[Eng123]

Dear All,

I have the following scenario: System A is UCP100 connecting though SIP Trunk to another system that only has SIP connectivity.

The site has BRI lines that is connecting to UCP system. We want when the call reach the BRI lines to be forwarded directly to system B and when system B wants to make a call to use those BRI lines through a certain access code.

In other word UCP will only be a gateway to transfer BRI lines to SIP trunks.

Can anyone help is such a case.

 

[xs650]

I think you can use CO call rerouting (PGM252) here.

One example that we use with fax servers that are connected via sip trunks to the UCP.
-BRI trunks use CO group 1
-SIP trunks use CO group 2
-every incoming call on the BRI trunks with 9xxx should be routed
via sip trunks to the fax server

PGM252:
compare CO Group: 1
compare digits: 9
Co + rerouting number: 8029 (802 is number of co group 2 and the 9 is still send to the fax server in this case)

Good luck