Call Recording 1

[hawks]

How do I set up On Demand? If I say record all calls it works perfect but if I set the extension to On Demand I don't know how to activate it. I've tried building a Feature code for it but no luck so far so I thought I would ask here.

 

[ucxguy]

On the Feature Codes configuration page, go to the Core section and you should find there approximately in the middle In-Call Asterisk Toggle Call Recording - the default value is *1. While on call, pressing *1 will toggle the recording state.

Make sure that adhoc recording is allowed for the call type (incoming/outgoing/caller/callee) - that is done by adding w or W on the General Settings page in the field Outbound Trunk Calls and Other Calls.

 

[hawks]

Thanks, I looked past the IN-CALL ASTERISK probably 1000 times without seeing Call Recording at the end of it.
I was looking for something as simple as Record a Call, call Record, ect...