call recording info in TSE

[teretore]

Hi all,
a have intresting problem - in CDR format
call-log to file and subformat commaseparated must be
IP phones IP aadress, where rtp packets are sent.
but it works only with dbc5446 phones! if I use some other
phones(dbc4425, dbc5433, SIP phones...), the filed is empty.
but with dbc5446 I can see IP aadress and port.
and with subformat html is the result exactly same.
does enybody have some good ideas?

MX-ONE 3.2 SP4 , SLES 10 SP2
MDSH> callinfo_output_set -output 0 -lim all -type file -subtype commaseparated -dbname /var/opt/eri_sn/call_logging/ -local
MDSH> callinfo_status_set -output 0 -lim 1 -state on
MDSH> callinfo_qos_report_set -on 8

MDSH> callinfo_output_set -output 1 -lim all -type file -subtype html -dbname /var/opt/eri_sn/call_logging/ -local
MDSH> callinfo_status_set -output 1 -lim 1 -state on

and CDR exaples -
call to H323 /dbc4425
2009-12-09 07:16:51, 2009-12-09 07:16:55, 2009-12-09 09:16:51 (EET), 2009-12-09 09:16:55 (EET), 0d00:00:04, 696, 0, 1, , , 662, 662, 8, 0, , , 0, 0, 0, , 0,
, 0, 255, 0, , 0, 0, 0, 0, , , , 1, 0, 1, 0-0-0-0, 0, 0, 0, , 0, 25, 1, 0, 1, 16, , , 1, 0, 0, 0, 0, 0, 0, 0, 0, S, 11, I, , I, , 932, 0


call to H323 /dbc5446
2009-12-09 07:17:13, 2009-12-09 07:17:16, 2009-12-09 09:17:13 (EET), 2009-12-09 09:17:16 (EET), 0d00:00:03, 696, 0, 1, , , 661, 661, 8, 0, , , 0, 0, 0, , 0,
, 0, 255, 0, , 0, 0, 0, 0, , , , 1, 0, 1, 0-0-0-0, 0, 0, 0, , 0, 26, 1, 0, 1, 16, 192.168.1.56:17000, , 1, 0, 0, 0, 0, 0, 0, 0, 0, S, 11, I, , I, , 932, 0


Thank you ahead!