Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
call pilot mini
- Thread starter mckinneyj
- Start date
- Thread starter
- #3
Thnks curleycord. Sounds like a simple task but the docs only talk about changing the IP at startup and the step after making the change is to go to the install wizard. I have installed a few, just never had to change an active Mini and I know they can be a little touchy.Did I forget to mention that there is no back up?
curlycord
Programmer
If you are wondering how to change it then look at the System Properties down below on the browser or around it.
If you do not know the existing IP (reply if NO) then you must connect a DB9 cable and go through with Putty or alike and change it that way.
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
If you do not know the existing IP (reply if NO) then you must connect a DB9 cable and go through with Putty or alike and change it that way.
________________________________________
=----(((((((((()----=
Toronto, Canada
Add me to LinkedIN
- Thread starter
- #5
- Status
Similar threads
- Locked
- Question
- Locked
- Question