Call Pilot Integration

[JcBWF]

We are going to be integrating CCM with a Call Pilot (hopefully via QSIG) and I was wondering if anyone had suggestions on what the T1s should look like on the Cisco side (and the Nortel side for that matter.

Thanks

Perfection is expected, Excellence is Tolerated

 

[whykap]

Is there a nortel pbx in the picture as well or is it strictly cucm with call pilot?
What version call manager?

 

[JcBWF]

There is a CS1000e in the picture that does have the QSIG option turned on.

CCM is 5.1

Perfection is expected, Excellence is Tolerated

 

[whykap]

check out this link. As you see you will need to integrate with the CS1000 and not directly to the call pilot. Although you will need to read through as you might be able to do it. That is probably a question for Nortel as well.

Since you cannot do QSIG you will have to go with SIP. Or add the QSIG software option to the nortel (my suggestion)

http://www.cisco.com/en/US/solution..._products_genericcontent0900aecd805b561d.html

 

[JcBWF]

whykap
Thanks for the link. We do have QSIG on the Nortel so that is the way we will go.



Perfection is expected, Excellence is Tolerated

 

[GHTROUT]

JcBWF, did you ever make a decision regarding "that"?

http://www.GHTweb.com/

~~~
[©] GHTROUT.com [⇔] A Variety of Free Resources for Nortel Meridian/CS1000 System Administrators