Hi,my cp (600 R5) doesn't answer when I call the CDN defined in the SDN. My CDN is 2999, I have create it in the PBX. I have DACR CP and Symposium, then reboot my symposium then the CP but... my 2008 are always "log out" if I do STAT. I can see when the CP boot that it takes control of CDN 2999, but when I call it, it's just ringing all the time. This was working before... I had different "number" it was 7999 and I changed all to have the proper "DDI" range, but since I have changed the ACD Key 0 in for the 2008, It doesn't work. Is there another place where I need to change the 79XX to 29XX? Thanks
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Pilot doesn't answer
- Thread starter gabtek
- Start date
- Status
Similar threads
- Locked
- Question
- Locked
- Question
