Call Pilot 150 won't play audio

[TeledataInAZ]

I have a customer with an MICS 6.1 with a Call Pilot 150. Every couple of weeks when someone goes to listen to messages the system will say "can't continue and boot them out. Not just the mailbox messages but greetings in admin also. If I reboot the Call Pilot comes up default and will work after being completely reprogrammed for a couple weeks but will do the same thing. And Oh yeah....the entire system has been replaced once and the new one does the same thing. Could there be a power issue or something at the customers building causing this? I have alot of Call Pilot installed and have never had one do these things. Thanks in advance for any thoughts.

 

[curlycord]

Was it the call pilot or software or both replaced? was the power supply replaced as well?.
Is it on a UPS battery?

Sounds like bad luck and 2 bad units in a row.


=----(((((((((()----=
curlycord

http://www.curlycord.com

 

[exsmogger]

I'd suspect a corrupt software card.

Brian Cox
Oregon Phone

http://www.OregonPhone.com

http://www.linkedin.com/in/briancox1952