Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations TouchToneTommy on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Pilot 150 remote login

Status
Not open for further replies.

leardininwc

Vendor
Apr 2, 2004
55
US
Hi. I have a call pilot 150 behind a Norstar MICS6.1 . I log in remotely through port 8000 and a day later nobody can log in through a browser internally or from outside unless we reboot the call pilot. Help.
Thank you.

-mike
 
I had a similar issue once on site, not resolved as the client didn't care to have it fixed.
You could get to the login page but then it struggled to let you in.
The client didn't care to have it fixed.

Things to try:
-Replace the patch cord
-Change the IP address
-Upgrade the CP to 3.1 (might clear a bug if any)
-Backup CP then do a restore (might clear a bug if any)
-Do a reinstall (might clear a bug if any)
-Get another cabinet (most likely the RJ45 is losing connection with the mobo)



________________________________________
small-logo-sig.png


=----(((((((((()----=
Toronto, Canada

Add me to LinkedIN
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top