WE INSTALLED A CALL PIOLT 150 3.1 SOFTWARE, AND NO MATTER WHAT DIDGIT WE ENTER, IT GOES STRAIGHT TO 333 THE ATTD. WE HAVE THE CCR TREE 1 ENABLED, AND PATH 0 = EXT. 333, SO AS YOU AS YOU ENTER THE FIRST DIDGIT, NO MATTER WHAT IT IS , IT HAS ALREADY IN PROGRESS TO EXT. 333. WHAT THE H AM I MISSING HERE??? JIM.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
CALL PILOT 150 GOING STRAIGHT TO ATTD NO MATTER WHAT DIDGIT IS ENTERED
- Thread starter commnorth
- Start date
curlycord
Programmer
Check Table/1 (or 2 etc) and navigate to DN Dialing (or something like that) and see if its on or off and change it.
=----(((((((((()----=
curlycord
Toronto Canada
=----(((((((((()----=
curlycord
Toronto Canada
- Status
Similar threads
- Locked
- Question
- Locked
- Question