Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Pilot 150 and BCM 200

Status
Not open for further replies.

ImTooOldForThis

Technical User
Dec 11, 2010
14
CA
Hi,
Migrating a system from Norstar with Call Pilot 150 to a BCM 200. Few questions:

a) Can I connect the Call Pilot 150 to the BCM 200?
b) If I have 20 mailbox licenses in the bcm 200 and 32 on the call pilot 150 existing unit, will all 52 be accessible when migrated?

Thanks
 
Even if you could get the CP 150 to talk to the BCM, you would need to disable (if you could) the embedded VM. So, best case scenario would give you either20 or 32 MBs...just buy more licenses for your BCM and put the CP 150 on Ebay, or keep it for another system.

Jim

"If I had known it would turn out like this, I would have became a locksmith" Albert Einstein

NCSS NCTS NCTE
Mitel 3300 4.2 basic & advanced, 5000 4.0
 
you cannot disable the embedded or get them to talk to each other. You must purchase the new licenses for the bcm. Its how nortel made sure they made money.

you cannot migrate your microsoft office 2007 license to office 2010.

its the same thing here
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top