I have a CP100 installed for a client for 10 years now. They have an application that we wanted to do which would use voicemail to email and the CP100 has 1 license in it. So we said we should be able to set that for you. Not thinking about newer computers and older CP100 software 3.1 we do not see the fields in the CP100 programming in configuration for the smtp info and all email info. I guess we need xp to make this work for them. Not sure if this is possible with newer computers. Please advise what we need to do to try to get unified working on 1 mail box for client.
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Pilot 100 Unified Message
- Thread starter telllman
- Start date
curlycord
Programmer
Try Configuration/System properties.
You need to install the client software too if I recall.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
You need to install the client software too if I recall.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
allworxguy
Vendor
There is no field for SMTP or pop3 on the call pilot. You need to load the software on the recipient machine that points to the cp ip address.
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
Marv ccna
Sales, Installation & Service for Norstar, BCM, Samsung & Allworx Serving Ottawa and Eastern Ontario since 1990
- Thread starter
- #4
curlycord
Programmer
Yes the Client Software I spoke of.....that is where all the programming is.
It is in the "Optional Software" on the CD that comes with the CP.
On the manual just look for the type of email program they have and follow that.
The only thing you may see on the Callpilot is a host name otherwise nothing else to do on the Callpilot.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
It is in the "Optional Software" on the CD that comes with the CP.
On the manual just look for the type of email program they have and follow that.
The only thing you may see on the Callpilot is a host name otherwise nothing else to do on the Callpilot.
________________________________________
We take the time to try to answer your questions for free, please return the favor and take the time to answer back and include any resolution you found elsewhere, thanks.
=----(((((((((()----=
Toronto Canada
- Status
Similar threads