Call Pilot 100/150 backup

[deadringer22004]

I am having trouble doing a backup on a Call Pilot 100 2.0. I can log into the Call Pilot at 192.168.110.10 with my ip address of 192.168.110.12. I go to operations, backup and exit out of the browser. I get into the BRU and set up a place for the backup to save. When I give it the Call Pilot address of 192.168.110.10 it tells me that it cannot connect to this site. I have tried using the BRU from a disk, going through a switch and even different Call Pilot machines.

I just appears that I am doing something wrong. Any Ideas?

 

[curlycord]

I am guessing it's because it is 2.0....still!?
2.0 was buggy version.

Upgrade to 3.1
Buy 3.1 card
Power down CP
Put new 3.1 in the front slot beside the existing one
Power up and wait 15 minutes
You have just upgraded the current 2.0 card to a 3.1
Power down and remove the new 3.1 card and keep it, or sell it or use it to upgrade another CP


Or view process with the laptop:

https://www.tek-tips.com/faqs.cfm?fid=4797

________________________________________

=----(((((((((()----=

http://www.curlycord.com

Toronto, Canada

Add me to LinkedIN

 

[deadringer22004]

Thank you Curly Cord. I'll see if I can get a 3.1 and try that.