I am hoping someone has some advice that can help me out. Right now I have a night bell on our CS1k that a departments picks up using a feature code on their analog wireless phones. We are not in the process of replacing all the wireless phone with IP wireless phones. The problem is that these IP phone are on a separate system that is connected to the CS1k by a QSIG T1.
Is there any way to get call pickup to work across a trunk? I have tried created a phantom extension that forwards to the feature code. I can that to work on my desk phone by dialing the phantom. But I get the following when I monitor the trunk when I dial the phantom from the wireless phone. 23279 is my wireless and 32111 is my phantom.
DCH 137 UIPE_IMSG CC_SETUP_IND REF 00000080 TOD 9:23:28 CK 56109856
CALLED #:32111 NUM PLAN: UNKNOWN TON: UNKNOWN
CALLING #:23279 NUM PLAN: PRIVATE TON: UNKNOWN
DCH 137 UIPE_OMSG CC_REJECT_REQ REF 00008080 CH 137 22 TOD 9:23:28 CK 56109858
CAUSE: #1 - UNASSIGNED NUMBER
Is there any way to get call pickup to work across a trunk? I have tried created a phantom extension that forwards to the feature code. I can that to work on my desk phone by dialing the phantom. But I get the following when I monitor the trunk when I dial the phantom from the wireless phone. 23279 is my wireless and 32111 is my phantom.
DCH 137 UIPE_IMSG CC_SETUP_IND REF 00000080 TOD 9:23:28 CK 56109856
CALLED #:32111 NUM PLAN: UNKNOWN TON: UNKNOWN
CALLING #:23279 NUM PLAN: PRIVATE TON: UNKNOWN
DCH 137 UIPE_OMSG CC_REJECT_REQ REF 00008080 CH 137 22 TOD 9:23:28 CK 56109858
CAUSE: #1 - UNASSIGNED NUMBER
