Call master beep

[fundooguy]

Hi,
I have heard call master 4 and 5 has capability of giving
warning tones internally.To do that one has to hit
1)select
2)mute
3)hit 78
4)then dislpay shows optins to (*)change or (#)save .
I got upto 4th step but not able to change the options or
navigate.
Can anybody explain what this feature is and how to change the options after 4th step.
Regards,
goacity

 

[mike144]

1.while on-hook(head set must be unplugged) press select
the lite next to select goes on
2.press mute
the call master set is in otion mode.
3. dial the "78"
the current setting is shown (enabled or disable)
4. dial 1 to change the setting (i think its 1)
5. hit the #

 

[phonepd]

I am not sure on this one but since these are recorder warning tones, you may need to have a Callmaster with a recorder interface(RIM)built in for the tones to work.

 

[Billy4888]

Are there other programming options like this for the CallMaster sets? Does anyone know of any documentation that exists for them?

 

[fundooguy]

Here is the process which I found on Avaya Site to Enable Beep Sound on Callmaster IV :

ENABLING OR DISABLING THE RECORD OUT SIGNAL

To enable or disable the Record Out Signal

1 While on-hook (the headset must be unplugged), press [ Select ].
· The light next to [ Select ] goes on.
2 Press [ Mute ].
· The CALLMASTER set is in option programming mode.
3 Dial the 2-digit code, "73" ("RE&quot.
· The current setting (Enabled or Disabled) is shown on the
display.
4 Dial [ * ] to change the setting.

5 When the setting you prefer is shown on the display, press [ # ] to
save it and exit programming mode.

NOTE: No recorder warning tones will be produced when the Record
Out Signal is disabled.

ENABLING OR DISABLING THE RECORDER WARNING TONE

To enable or disable the warning tone on the recorder interface

1 While on-hook (the headset must be unplugged), press [ Select ].
· The light next to [ Select ] goes on.
2 Press [ Mute ].
· The CALLMASTER set is in option programming mode.
3 Dial the 2-digit code, "78" ("RT&quot.
· The current setting (Enabled or Disabled) is shown on the
display.

4 Dial [ * ] to change the setting.

5 When the setting you prefer is shown on the display, press [ # ] to
save it and exit programming mode.

NOTE: No recorder warning tones will be produced when the Record
Out Signal is disabled regardless of the setting of these tones.

Thanx......
goa city

 

[anisbet2171]

Recording tones on a Callmaster V is set by 2 DIP switches on the base of the phone. On a Callmaster V, the RIM is always on.