Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Manager Nortel Integration

Status
Not open for further replies.
Wavesg

Wavesg

Technical User
Jul 11, 2001
237
US
I have A call manager 3.1((3a) with a MGCP gateway (ws 6608 T1 ) with 2 PRI going to a Nortel Meridian PBX Relase 21. The call Mananger log is reporing the following error Route list exusted. Unknown parameter PSTN.

When I check on the pbx I could see the PRI channel locking up which in term makes it impossible to dial out. The PBX also reports protocol errors or Cause error 44.

This happens to all the channels . The only fix is to reset the PRI line on the PBX.

Any ideas.

 
Status
Not open for further replies.

Similar threads

wolf8963
  • Question
Grandstream HT841 with call manager
Replies
2
Views
156
wolf8963
wolf8963
mikedphones
  • Locked
  • Question
MASS - Looking for a Cisco Call Manager support tech to move and reconfigure
Replies
0
Views
227
mikedphones
mikedphones
Gnjiro
  • Locked
  • Question
Cisco Ip Phone 7841, 7821 Delay when making call both inbound and outbound in sip protocol
Replies
3
Views
267
thepfy
thepfy
Lccarter
  • Locked
  • Question
Telemanagement System for Cisco Call Manager
Replies
0
Views
80
Lccarter
Lccarter
drew41238
  • Locked
  • Question
Cisco Call Manager Partition Character Limits
Replies
3
Views
144
gnrslash4life
gnrslash4life

Part and Inventory Search

Sponsor

Back
Top