Call Logging Interface

[riking]

I have a norstar 6x16 DR5 system installed and i would like to try and get the caller id to display on the handsets. after reading on the web i was under the impresion that you can do this if you have a "Call Logging Interface" which i now have. i have yet to connect the CLI to a computer, is it possiable to view some logs on the handset. Also i have read that there is a second menu when you are in F9*2 does anyone know the password for this.

Thanks

 

[larry312]

You can't do CLID on a 6x16 without an M6 add on module.

 

[JohnjDefongi]

For a 616 you have to use a C6 module not a M8 which is for the 8X24 KSU. You also have to use a station port.