Call Logging (CDR)

[jammydodger]

How do I set up a TTY port for Call Logging (CDR I think)

 

[cmawbey]

CDR set up

>ld 17
CFN000
MEM AVAIL: (U/P): 50653 USED: 522786 TOT: 573439
DISK RECS AVAIL: 472
DCH AVAIL: 60 USED: 4 TOT: 64
AML AVAIL: 15 USED: 1 TOT: 16
REQ chg
TYPE adan
ADAN new tty 2
TTY_TYPE sdi
CAB 0
CDNO 0
PORT 2
DES CDR
FLOW no
BPS 9600
BITL 8
STOP 1
PARY none
ENL yes
USER cty

>ld 15
CDB000
MEM AVAIL: (U/P): 50562 USED: 522877 TOT: 573439
DISK RECS AVAIL: 472
REQ: chg
TYPE: cdr

TYPE CDR_DATA
CUST 0
CDR yes
AXID yes Provide TN if the call is from a multiple apperance DN
TRCR yes Provide carriage return after each CDR record output
CDPR yes CDP option inserts ACOD before DSC or TSC
ECDR no Print end-to-end signalling digits in the CDR records
OTCR yes CDR provided is based on originally dialled trunk route
PORT 2 Port to send CDR data to. This must be of type CTY.
PORT Add more CDR output ports if you wish.
CNI dgts Calling Number Identification DGTS, CLID or NONE
CHLN 0 Charge Account number length (0-23)
FCAF no Forced Charge account active (yes/no)
CHMN 2 Only given if FCAF=yes.
FCNC 0 Only given if FCAF=yes.


There are in essence two points where CDR records are generated, one is on a Trunk basis,

and one is on a Set basis. This page is dedicated to the most common point of record
generation - Trunks.
All Trunks when configured will be part of a route. The CDR configuration
is done thus on a Route basis.
CDR YES INC YES LAST YES TTA YES ABAN YES CDRB NO QREC YES
OAL YES AIA YES OAN YES OPD NO







Colin