Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Log Password - Option 61c 1
- Thread starter GeauxLSU
- Start date
-
1
- #2
You can reset the password,using the instructions below. Then go to "Password Administration" thru the Directory/Log button and turn off "Password enabled".
Try this in LD 32...
CPWD l s c u Reset or Clear directory password for M3000 set. Allows the M3000 Directory password of the specified M3000
set to be reset to default (12345678). This allows a user to access the M3000 Directory if the password has been
forgotten or if the user wants to change the current password. Applies to M3903, M3904, M3905, and i2004.
For M3900 Phase 3 terminals the Directory password is cleared.
Try this in LD 32...
CPWD l s c u Reset or Clear directory password for M3000 set. Allows the M3000 Directory password of the specified M3000
set to be reset to default (12345678). This allows a user to access the M3000 Directory if the password has been
forgotten or if the user wants to change the current password. Applies to M3903, M3904, M3905, and i2004.
For M3900 Phase 3 terminals the Directory password is cleared.
- Status
Similar threads
- Locked
- Question