call from outside trough the ip office?

[polaroid]

hi, is possible trough the ip office or trough VOICEMAIL PRO to let an incoming call choose and dial an outgoing number?
for instance,a seller calls from home to the ip office,then "inside" dial a number and calls .
so the call is made by the ip office.

 

[wontwork]

In the incoming call route just put the external number in the destination field

 

[polaroid]

i know,if i want to do this for just one number,the same one .
BUT i want to use the ip office to make calls ,each time to different numbers.
i call the ip office and then i decide to dial anexternal nuber!!!

 

[kflounders]

Create a Module in VMPro that requires a PIN to enter it. Connect the start point to a Menu point with 9????????? and 91????????? touch tones (in the US). Then connect them to a Transfer point that sends the calls to $KEY. When you call the DID associated with the module you will hear a prompt to enter your PIN, then you will hear a prompt(that you record) that says somthing like "You have reached a non-working DID for ABC company, please hang up and call again" (just to fool would be toll bandits), you can then enter 9 ans your number and it will dial away. If you aren't worried about toll fraud, you could leave instructions on how to dial out instead of the phoney "non-working DID" message, but be careful with abuse and change PINs on a regular basis.

 

[sizbut]

Search the IP Office forums for the terms "DISA" - Direct Inward System Access - the technical name for what you want to do.

 

[MrIPO]

post your email address in the xxx at xxx.com format I'll email you a setup guide I have created for a DISA bridge.

Umm anotherprivatebuild !!!

 

[polaroid]

here i have to dial 0 before the number,should be the same ,but doesn't works.

 

[Nokarro]

Please forward me that guide to
len.joubert at kathea.co.za

 

[polaroid]

seems to work but only if i set a short code like
short code 0?????????
number N

but in this way i an only make calls like the ones with the same number of question marks

like 0??????????
00591234567
and if a create different short codes with less or more ?????? i can only make calls with minor numbers of question marks

even if i set different modules each one with different "short codes" the result is the same