DallasTXtech
Technical User
I have a phantom ext with unconditional fwding. Time profile created, Yet calls still get through
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call forwarding to external number during after hour is not working. Please help.
- Thread starter DallasTXtech
- Start date
- Status
time profile is set in the incoming call route and the night target it the forwarded user?
that should work
can you call the phantom ext internally and it dials out?
Joe W.
FHandw, ACSS (SME)
"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
that should work
can you call the phantom ext internally and it dials out?
Joe W.
FHandw, ACSS (SME)
"This is the end of the world, make sure to buy your T-shirt before it is too late"
Original expression of my daughter
intrigrant
Systems Engineer
No need for a phantom user if using ICR with a time profile.
Create a time profile with the time setting when the calls need to be forwarded.
In ICR in targets set the default destinantion to the user/group calls have to go to in the time the time profile is not active.
Below the default entry add another entry, select the time profile and set the external number as the target.
Create a time profile with the time setting when the calls need to be forwarded.
In ICR in targets set the default destinantion to the user/group calls have to go to in the time the time profile is not active.
Below the default entry add another entry, select the time profile and set the external number as the target.
- Status