Call forwarding "I Am Here"

[phoneguy94]

I recently forwarded an analog line to a 4025phone by using Call Forwarding I Am Here. How can I cancel that forwarding?

 

[MitelInMyBlood]

Either

Physically go to the analog line and use the Cancel Call Forward Feature Access Code (assuming you have one defined)

Optionally use the remote clear all features access code from anywhere on the system. Dial the Clear all Feats code + the extn of the analog line (note this will cancel ***ALL*** feats on this line.

Finally, if you have an attendant console on the system you can do it from there as well



Original MUG/NAMU Charter Member

 

[kwbMitel]

Several Methods.

Basically, CF I am Here creates and always forward condition from the designated set to the activating set.

Any action that will cancel Call Forward Always on the originating set will work.

FAC - Cancel Forward All, dialed from Analog set
FAC - Cancel Call Forward Follow Me, dialed from analog set
FAC - Cancel Call Forward Follow Me Remote, Dialed from 4025
FAC - Cancel Call Forward Third Party, Dialed from any enabled set

A console may be able to cancel te forwarding as well, but one of the abave should get you there.

*******************************************************
Occam's Razor - All things being equal, the simplest solution is the right one.

 

[phoneguy94]

Thank you.

This system was installed before I got here. It's a 3300MXE, is there a way I can list out all the feature access codes programmed in the system from a terminal?

 

[UncleRalph]

Go to the Feature access codes form.

Ralph

 

[phoneguy94]

The user activated DND on the analog line. It's fixed now.
Thanks for your help