Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call Forwarding on Phantom Number 2

Status
Not open for further replies.

Shivrohi

Technical User
May 22, 2020
103
CA
Hi Everyone

Thanks all in advance !!
I am here again to get some guidance fro you all as I am new to Avaya Platform.

I am trying to configure call forwarding on a phantom number but I could not do that.


Phantom Number
=============
TN 003 0 06 17 VIRTUAL
TYPE 500
CDEN 4D
CUST 0
MRT
ERL 00000
WRLS NO
DN 1234 0 MARP
CPND
NAME SHIVROHI
XPLN 27
DISPLAY_FMT FIRST,LAST
AST NO
IAPG 0
HUNT
TGAR 1
LDN NO
NCOS 0
SGRP 0
RNPG 0
XLST 0
SCI 0
SCPW
CLS CTD DTN FBD XFA WTA THFD FND HTD ONS
LPR XRA AGRD CWD SWD MWD RMMD LPD XHD SLKD CCSD LND TVD
CFTD SFD MRD C6D CNID CLBD AUTU
ICDD CDMD LLCN EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD SDND
MBXD CPFA CPTA DDGA NAMA MIND
MCRD
EXR0 SHL ABDD CFHD DNDY DNO3
CWND USMD USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTU
CDMR PRED MCDD T87D SBMD PKCH MPTD ELCD
PLEV 02
PUID
UPWD
AACS NO
MLWU_LANG 0
FTR CFW 4
FTR PHD
============

I want the calls to be forwarded on 5678 for the above phantom number.

Please guide me how to achieve this.


Regards
 
I am getting these errors while configuring call forwarding


ITEM FTR DCFW SCH6395
FTR 4 SCH0355
SCH0355
FTR FTR SCH0355
FTR DCFW
SCH6395
FTR
ITEM FTR DCFW SCH6395


===================

Could not understand it at all. Am I missing something or doing something wrong
 
Hi @KCFLHRC
Thanks for the info.

I have changed the CLS to FNA from FND, but still getting the same error.


ld 20
REQ: chg
TYPE: 500
TN 003 0 06 17
ECHG yes
ITEM FTR DCFW SCH6395
FTR 4 SCH0355
FTR


Please suggest !!
 
If I am not mistaken Type 500 is a Phantom Number. Please find the detail

TN 003 0 06 17 VIRTUAL
TYPE 500
CDEN 4D

Please suggest
 
Type 500 is just an analog, has nothing to do with Phantom's. Phantom loops need created. You cant just pick a TN and call it a 500 and it be a phantom.
 
Thanks @KCFLHRC.

I got your point.

SO If I have to look for the Unused Phantom Numbers in CS1000 device, how should I do it so that I will configure a new one.

I was doing this to find out the unused Phantom Numbers :

ld 20
req: luvu
Type : 500


Am I right when I do this ?


Regards



 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top