Call Forwarding on a TN issue

[HantzT]

I have two Telephone 2616 with the same configuration when i try to program a key that will forward on a cell phone I get a SCH2064 on one telephone but not onthe other one. Except for the TN and DN numbers they identical. As soon as I hit the space bar after the CFW I get the error.

What am I missing here?

Here is what i'm typing!

[pre]>LD 11
REQ: CHG
TYPE: 2616
TN 040 0 00 08
ECHG YES
ITEM KEY 09 CFW SCH2064
KEY [/pre]

 

[GHTROUT]

If you promise to look up the error next time, I will read you what SCH2064 means: ~~ [tt]You cannot have two CFW keys on the same TN.[/tt]

Here is a set of books for you:

http://www.ghtrout.com/micromerl/

~~
Gene at GHTROUT.com

 

[HantzT]

I do promise to check it out at the right place. Cause I search for it and the first result was "your logi is restricted".
Since I was login as ADMIN1 I didn't know what it was.

Thanks GHTROUT you are very helpful.

 

[jamie2]

Hantz, You can check the error on the switch.

>ERR SCH2064

SCH2064
The desired key is already defined.
Only one CSD key is allowed for each set.
Severity: Info