Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call forward 1

Status
Not open for further replies.

AdminSL1

Programmer
May 17, 2006
35
CA
Hi,

I want to know how to do a no answer call forward on a 500 phone. I configure the cls HTA and FNA. I don't know why but the feature fdn is impossible to configure.
 
> LD 10
REQ NEW
TYPE 500
TN L S C U (Loop number, Shelf number, Card number, Unit).
FTR CFW XX Assign the Call Forward All Calls feature.

Set the maximum number of digits the user can enter for the Call Forward destination number.
XX is the maximum number of digits the user can enter for the Call Forward destination number. The default is 4.


Activating the Feature

1. Lift handset.
2. Enter #1
3. Enter DN to which all calls are forwarded.
4. Replace handset.

De-Activating the Feature

1. Lift handset.
2. Enter #1.
3. Replace handset.
 
to do a forward no answer on a 500 set cls=fna
ftr=fdn x yyyy
x=number of digits forwarding to
xxxx=ext. forwarding to
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top