Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call forward to DN Phantom

Status
Not open for further replies.
Oct 31, 2017
21
AE
Hi All,

please help how to forward any call to DN Phantom
 
The phantom loops are set up in LD 97, and these days the format will probably be based on the large switch format, but I have added in the older Option 11c guide for reference.

The Phantom TN is built in the same way as a standard 500 analogue set, but a few minor differences.

You need to have the following CLS set,
CFXA if the forwarded DN is external
SFA for allow more than one number at a time to be forwwarded
FNA to allow the DN to be changed by using the RCFA FFC feature.
SCPW to be set when using the RCFA FFC feature.

When adding in the set, make sure under "FTR" that you have DCFW following by the number of digits to be dialed and then the actual number to be forwarded.

Here is an example below of a Phantom DN

DES PAGERS
TN 063 0 00 02 PHANTOM
TYPE 500
CDEN 4D
CUST 0
WRLS NO
DN 7719 0 MARP
AST NO
IAPG 0
HUNT
TGAR 0
LDN NO
NCOS 1
SGRP 0
RNPG 0
XLST 0
SCI 0
SCPW 7719
SFLT NO
CAC_MFC 0
CLS CTD DTN FBD XFD WTA THFD FND HTD ONS
LPR XRD AGRD CWD SWD MWD RMMD SMWD LPD XHD SLKD CCSD LND TVD
CFTD SFA MRD C6D CNID CLBD AUTU
ICDD CDMD EHTD MCTD
GPUD DPUD CFXD ARHD OVDD AGTD CLTD LDTD ASCD
MBXD UDI RCC HBTD IRGD DDGA NAMA MIND
NRWD NRCD NROD SPKD CRD PRSD MCRD
EXR0 SHL SMSD ABDD CFHD DNDY DNO3
USRD BNRD OCBD RTDD RBDD RBHD FAXD CNUD CNAD PGND FTTC
FDSD NOVD CDMR
PLEV 02
CSDN
AACS NO
MLWU_LANG 0
FTR DCFW 4 8719
FDN 8323
DATE 6 JUN 2002



Firebird Scrambler

Nortel & Avaya Meridian 1 / Succession & BCM / Norstar Programmer

Website = linkedin
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top