Call Forward to an Outside Line on a Meridan 11c

[Direwolfdave]

I was hoping that someone could tell me how to allow call forwarding to an outside line on a Meridian Option 11c phone system. I would need this number format
9-1-xxx-xxx-xxxx

 

[cmawbey]

hello
the easiest way first is to set CFXA (call forward external allowed) in the CLS. Colin

 

[Direwolfdave]

I changed the cls but it still does not work. I'm thinking I have to make a ld 23 change but I don't know the exact commands.

 

[Reusser]

To use ld 23 (dummy acd)

delete all appearances of the DN you want to forward. Then:

LD 23
Req: New
Type: ACD
ACDN: <-- enter the DN number you want to forward off site
MAXP: 1
NCFW: 9xxxxxxxxxx <-- enter the number you want the call to forward to as you would dial it from a phone.

 

[Direwolfdave]

Ok. I used '5555' as the DN for that forwarding number. I can dial it and it goes to the outside number. But when I try to set my phone to call forward to '5555' is gives me a 'RELEASE AND TRY AGAIN' message and a busy signal. What am I missing?

 

[cmawbey]

Post your TN here Colin

 

[Direwolfdave]

DES 42
TN 011 0 00 05
TYPE 2008
CDEN 8D
CUST 0
FDN 5151
TGAR 1
LDN NO
NCOS 5
SGRP 0
RNPG 0
SCI 0
SSU 0000
LNRS 16
XLST
CLS CTD FBD WTA LPR MTD FNA HTA ADD HFD
MWA AAD IMD XHD IRD NID OLD VCE DRG1
POD DSX VMD CMSD CCSD SWD LNA CNDA
CFTD SFD MRD DDV CNID
ICDD CDMD LLCN MCTD CLBD AUTU
GPUA DPUA DNDA CFXD ARHD CLTD ASCD
CPFA CPTA ABDD CFHD FICD NAID
DDGA NAMA
USMD USRD ULAD RTDD PGND FLXD
CPND_LANG ENG
RCO 0
HUNT 5151
LHK 1
PLEV 02
AST
IAPG 0
AACS NO
ITNA NO
DGRP
MLWU_LANG 0
DNDR 0
KEY 00 SCR 5041 0 MARP
CPND
NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
01 SCR 6041 0 MARP
CPND
NAME
XPLN 27
DISPLAY_FMT FIRST,LAST
02 TRN
03 AO6
04 CFW 4 5555
05 SSU 0000
06 MWK 5151
07
DATE 29 MAY 2002

 

[wolfi24]

Try use in cls cfxa and sfa .

 

[cmawbey]

i agree with Wolfi....cfxa call fwd external allowed
..sfa secondary forward allowed

Colin

 

[Direwolfdave]

Actually it worked.. I had the 5555 in the fwd of another phone and it would not allow mine to do the same.. The problem is now fixed.
Thank you everybody for all your help!

 

[acewarlock]

The way I forward external is make CLS (CFXA) then I change the CFW key to CFW 16 91XXXXXXXXXXX, I dont use ACD.

 

[pfrenger]

When using CFXA you also need to set the CF to 12