Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations Mike Lewis on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Call Forward Remote
- Thread starter keschber
- Start date
Depends
if you had another application you could use Micollab client to change the status of it
otherwise you would have to use DISA - activating DISA shouldnt be done lightly as its a toll fraud opening
If I never did anything I'd never done before , I'd never do anything.....
if you had another application you could use Micollab client to change the status of it
otherwise you would have to use DISA - activating DISA shouldnt be done lightly as its a toll fraud opening
If I never did anything I'd never done before , I'd never do anything.....
yes feature access codes. You need to enable all the Call forwarding options in COS.
Then you need the Hot Desking Access number configured in System access points.
The offnet number needs to be added as an EDHU
Finally on the trunks enable call recognition.
Then you need the Hot Desking Access number configured in System access points.
The offnet number needs to be added as an EDHU
Finally on the trunks enable call recognition.
@keschber
Simplest way I can think of that doesn't compromise the security of your system or use too much in the way of programming or licensing.
Create a speedcall to dial the digits
Allow your Voicemail ports to dial the 3rd party code in COS (you may needs the trunk to be capable as well/instead)
Allow your VM ports to transfer to any station
Call in to Auto-Att and dial Speedcall Digits.
I have not tested this, the theory is sound.
**********************************************
What's most important is that you realise ... There is no spoon.
Simplest way I can think of that doesn't compromise the security of your system or use too much in the way of programming or licensing.
Create a speedcall to dial the digits
Allow your Voicemail ports to dial the 3rd party code in COS (you may needs the trunk to be capable as well/instead)
Allow your VM ports to transfer to any station
Call in to Auto-Att and dial Speedcall Digits.
I have not tested this, the theory is sound.
**********************************************
What's most important is that you realise ... There is no spoon.
- Status
Similar threads
