CALL FORWARD OFF SITE

[kaprigge]

I'm having trouble getting the call forward off net working on my Definity G3 Version 8. I have the trunk to trunk transfer turned on, and the call forward all on in COS. After forwarding the phone I can place an intercom call to the forwarded station and it dials out fine. If I call in from the outside and have the call transfered manualy the system gives me music for about 1 second and then hangs up on me. I dont need coverage on the calls as voicemail on a cell phone will take care of that.

Any suggestions?

 

[Phoneman2]

You can call off net without trunk to trunk turned on. The numbers need to be pre-programmed. this would be a lot saver then having trunk to trunk turned on. Would this way work for you ? Wisdom is Knowledge
that is Shared

Thanks All Phoneman2

 

[kaprigge]

That would work fine, can you give me a summary of how to accomplish it.

Thanks

 

[Phoneman2]

By using the cover remote form you can fill in preprogrammed number that will dial off site. Assign r1, r2 and so on in the cover path of an extension. When a call comes in it will follow the cover path to the remote dial off site. Wisdom is Knowledge
that is Shared

Thanks All Phoneman2