Call forward external with telco account codes

[TravelerM1]

Hello, I'm trying to call forward phones to external LD numbers and the telco requires a 4 digit account code.
Programmed CFW 23 on the phones with CFXA, programed the CFW button with 913015551212,,1111 and activate but when calling the phone it forwards but the account code does not seem to be sent, you hear the account code tone.

TYPE RDR_DATA
CUST 00
OPT CFF CFRD PVCD CWRD MCI
FNAD FDN
FNAT FDN
FNAL FDN
CFTA NO
CCFWDN


NET_DATA
TRNX YES
EXTT YES
FTOP FTLY


Thanks for the help

TravelerM1

 

[GHTROUT]

I think you are going to be stuck forever on this one. My guess is it's never gonna work right because once the call is connected (to the carrier wanting the codes), I think anything in CFW is abandoned.


~~~
[small]GHTROUT.com | Get the Input/Output Manuals | Tek-Tips FAQs | Recent Replies[/small]

 

[don2119]

I agree with GHTROUT I have tried this and it does not work.
I went to the carrier and was able to get them to realease that(DID) number from needing an account code. But of course now any call can be made from that phone.

 

[johnpoole]

best bet, add a couple of copper trunks and use acod to cfxa.. that is just one reason i control auth codes.. not only can i change one in 2 seconds i can turn them on and off either manually or on a time of day schedule per ncos..

the more of your software you farm out the less flexable your switch is..

john poole
bellsouth business
columbia,sc