Call Duration Time.

[wahacom]

Hi All

Any body has patch for call duration time ( the call will disconnect after certain time). When somebody from exchange (MD110) seized an external line ( using TLU75) then, I want the MD110 automatically disconnect the line after 10 mentis for example either incoming call or outgoing call.

Best regards

 

[fcpli]

If I remember right, there was a patch (90950?) for BC10
made for Saudi market (someone correct me if I am wrong), but
for BC9, Bc11, no idea. Converting is always possible, if someone knows how to.
That Saudi patch was disconnecting after 20 minutes, and worked with TLP11 unit.

 

[HIREI]

IMHO: good question. Some people do it automatically with WinFIOL and self-made SW scanning the call by susip.

But why not it's the standard feature? The puzzle or if anyone to explane?

 

[himdp]

fcpli, it was written for BC10 TLP11 in Saudi Arabia as SA-3369 which became 90950. This was a conversion of the BC9 patch SA-3324 which did not get uploaded to Tacos and therefore did not get a number. Both patches had the timer configurable from 4 to 60 minutes in 4 minute steps based on VARO, so was route dependant and could also be switched off. Since we do not know if wahacom is using TLP11 this information is probably for interest only

 

[wahacom]

Hi himdp.

I used TLU75 to PPT,( TLP11).and parameters is:

ROCAI:ROU=xx,SEL=713000000000001,SIG=500000000000,TRAF=01151515,SERV=2100000000,TRM=4;
RODAI:ROU=xx,TYPE=TL11,VARC=00000112,VARI=00000488,VARO=00000814;