Call diversion on busy to a QSIG line does not work

[noro]

Dear guys,
We have integrated an UM server via ISO-QSIG tie line with MD110 BC12SP03, call forwards immediate (cfu) and on not responding (cfnr)are working fine towards UM server, but the forward on busy (cfb) not.
We have tried the CDINI command, but cfb still does not work. The QSIG config is below.

Is it necessary to set any additional param for cfb to work ?

Thank you very much, Norbert


CDINIIR=260,DIV=8600;
EXECUTED

SUSIPIR=260;
STATUS INFORMATION AT 13:41:16 18FEB05

DIR TYPE TRAFFIC STATE/PTR LINE STATE/PTR DIV STATE ADD INFO

260 DTS IDLE #0254 FREE #02F5 NAN
ODN1:IDLE
ODN2:IDLE
ODN3:IDLE


Our QSIG config:

RODAP:ROU=78;
ROUTE DATA
ROU TYPE VARC VARI VARO FILTER
78 SL60 H'00000204 H'50040000 H'04300020 NO

END

RODDPEST=8600;
EXTERNAL DESTINATION ROUTE DATA
DEST DRN ROU CHO CUST ADC TRC SRT NUMACK PRE
8600 78 0505000000000250005000000 0 1 0

END

ROCAP:ROU=78;
ROUTE CATEGORY DATA
ROU SEL TRM SERV NODG DIST DISL TRAF SIG BCAP
78 7110025000000010 5 3110000011 0 30 128 01151515 111111000031 001100

END

ASPAPARNUM=223;
APPLICATION SYSTEM PARAMETERS
PARNUM PARVAL
223 7

VERSION=DAMOVO/GERMANY/BC12SP03/R4A

 

[fidde]

Do the extension have the correct CDIV categori ??

If it has try to reactivate it *212#....

 

[noro]

Thank you very much for your advice !
CDIV was 001130000 and we changed it to 001150000 and now cfb works also fine.