Call diversion for specific extension 1

[EndreMD]

Hi members !
I come again with another question if you're kind and if you wanna provide assistance. I have to make a call diversion as follows:
If extension A calls extension B, the call has to be diverted to extension C, all the other extensions which calls B don't have to be diverted to C, so if X,Y,V calls B the call enters normally on B.
It is any possibility to do this? I have 5.0 SP5, so I don't have PELPI, just call_list if matters.

Thank you !

 

[parnum]

You can’t do it without CTI such as Solidus, not a feature of MX,

Best parnum

 

[EndreMD]

Thank you parnum !