Call Display with BCM50 R3.0 and auto-attendant possible?

[pjevnisek]

We have a system set up to use auto-attendant to answer all incoming calls. When a call is forwarded by auto-attendant to any given extention the call display shows that its a transferred call. Is there a way to re-configure this to display caller ID information on the display screen?

Peter

 

[yankblan]

Set up auto-attendant to answer after 2 rings if you have caller ID active on your lines, of course. Caller ID info transmits between 1st and second ring.

 

[pjevnisek]

It worked! Thanks yankblan.