Call Display on a NORSTAR 3X8 DR5.1 system

[dabble]

I have a Norstar installed that I would like to send call display to. This Norstar is connected to our main site with three OPX extensions running off a CS1000M ar Rls 4.5.

I can set up the OPX extensions as CLASS set in order to send the caller ID across these lines, but is there anything I need on the NORSTAR end to allow this information through to the sets which are 7310 sets?

Thanks.

 

[curlycord]

Auto call id suppported on one set only and lines must appear and ring.

Under Config/Sets/TelcoFeatures assign the lines and set call ID to Y


=----(((((((((()----=
curlycord

http://www.curlycord.com