Guest_imported
New member
- Jan 1, 1970
- 0
i need to in stall a wall phone with a call button on a partner phone swith. Can you give me the directions on how this is done. thank you
Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
call button/ wall phone
- Thread starter Guest_imported
- Start date
- Status
I assume you know how to wire up the phone. I also assume by call button you want one touch dialing to an attendant or some other extension, here are the instructions for programming the button:
Auto Dial buttons can be programmed only on system phones.
This Telephone Programming procedure lets system phone users dial outside numbers, extension numbers, feature codes, or account codes with a single touch, by pressing a programmed button. An Auto Dial number can be stored on any programmable buttons (a button with no line or pool assigned) on a system phone.
MLS-6, MLC-6, MDC 9000, and MDW 9000 system phones only have four buttons available for lines, pools, and/or Auto Dial numbers.
Examples
Outside Phone Number. Enter the phone number (up to 28 digits) exactly as you would dial it. For example, to program 555-2398, press [ 5 ] [ 5 ] [ 5 ] [ 2 ] [ 3 ] [ 9 ] [ 8 ].
Extension Number. Press the left [ Intercom ] button and enter the two-digit extension number. Include a [ * ] before the extension number to program the Auto Dial button to voice signal an extension. For example, to program extension 20 for voice signaling, press left [ Intercom ] [ * ] [ 2] [ 0 ]. The display reads: Intercom *20
Feature Code. Enter the appropriate code. For example, to program a button to turn on the message light at extension 20, press;
[ Feature ] [ 0 ] [ 9 ] [ 2 ] [ 0 ]. When you press the programmed button, the Message Light at extension 20 turns on.
--------------------------------------------------------------------------------
Programming
To program an Auto Dial button:
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
Enter the number of the extension to be programmed.
Press a programmable button.
Enter an outside phone number, feature code, account code, or PBX/Centrex feature access code; or press left [ Intercom ] and enter an extension number.
Repeat Steps 3 and 4 to program additional Auto Dial buttons, or exit programming mode.
Auto Dial buttons can be programmed only on system phones.
This Telephone Programming procedure lets system phone users dial outside numbers, extension numbers, feature codes, or account codes with a single touch, by pressing a programmed button. An Auto Dial number can be stored on any programmable buttons (a button with no line or pool assigned) on a system phone.
MLS-6, MLC-6, MDC 9000, and MDW 9000 system phones only have four buttons available for lines, pools, and/or Auto Dial numbers.
Examples
Outside Phone Number. Enter the phone number (up to 28 digits) exactly as you would dial it. For example, to program 555-2398, press [ 5 ] [ 5 ] [ 5 ] [ 2 ] [ 3 ] [ 9 ] [ 8 ].
Extension Number. Press the left [ Intercom ] button and enter the two-digit extension number. Include a [ * ] before the extension number to program the Auto Dial button to voice signal an extension. For example, to program extension 20 for voice signaling, press left [ Intercom ] [ * ] [ 2] [ 0 ]. The display reads: Intercom *20
Feature Code. Enter the appropriate code. For example, to program a button to turn on the message light at extension 20, press;
[ Feature ] [ 0 ] [ 9 ] [ 2 ] [ 0 ]. When you press the programmed button, the Message Light at extension 20 turns on.
--------------------------------------------------------------------------------
Programming
To program an Auto Dial button:
Press [ Feature ] [ 0 ] [ 0 ] [ System Program ] [ System Program ] [ Central Tel Program ].
Enter the number of the extension to be programmed.
Press a programmable button.
Enter an outside phone number, feature code, account code, or PBX/Centrex feature access code; or press left [ Intercom ] and enter an extension number.
Repeat Steps 3 and 4 to program additional Auto Dial buttons, or exit programming mode.
- Status
Similar threads
- Locked
- Question