Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations Chris Miller on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Call button system

Status
Not open for further replies.

Kozusnik

Programmer
Feb 27, 2005
620
Hi everyone. I'm interested in purchasing (or creating) a call button system similar to the call button on a hospital bed. I'd like to have a wireless pendant transmitter which connects through a wireless router and sends a signal to a server (IP based). I'll write the software to capture the signal. One step down from that would be a receiver which connects to a pc via usb or rs-232. I've found several which might work, but most have a limited number of channels. I'd prefer it be unlimited (or at least 75 channels per receiver). Hence the wireless to server.

Any suggestions or links? The search on tek-tips seems to be down at the moment so I couldn't search the forums.

Thanks,
Mark
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top