Hi,
Any help on the following would be sincerely appreciated:
I have a remote access router set-up on the network with a connecting PRI for remote access. A complaint that I received though is that when someone is connecting in from a BRI 2 channels are opening when making the call into the router but I have call back set-up on the router and it is only calling back on one channel, I need it to call back on 2..
Any ideas?
Multiink is set-up on the dialer so I assumed that would be enough??
interface Dialer1
ip unnumbered Loopback0
encapsulation ppp
no ip mroute-cache
dialer in-band
dialer idle-timeout 300
dialer-group 1
peer default ip address pool mds-ppp-pool
compress stac
ppp callback accept
ppp authentication chap
ppp multilink
!
Thanks in advance.
Paul
Any help on the following would be sincerely appreciated:
I have a remote access router set-up on the network with a connecting PRI for remote access. A complaint that I received though is that when someone is connecting in from a BRI 2 channels are opening when making the call into the router but I have call back set-up on the router and it is only calling back on one channel, I need it to call back on 2..
Any ideas?
Multiink is set-up on the dialer so I assumed that would be enough??
interface Dialer1
ip unnumbered Loopback0
encapsulation ppp
no ip mroute-cache
dialer in-band
dialer idle-timeout 300
dialer-group 1
peer default ip address pool mds-ppp-pool
compress stac
ppp callback accept
ppp authentication chap
ppp multilink
!
Thanks in advance.
Paul