Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

Register Log in
  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Calibration

Status
Not open for further replies.
tomd110

tomd110

Technical User
Sep 18, 2003
49
AT
Hi to you all !

My system is a BC9 with 3 LIMs.

When i do the command CATII:DATE=2003-9-19,TIME=8-12,CALIB=BEGIN and then after 72 hours CATII:DATE=2003-9-22,TIME=8-12,CALIB=END i always get the message CALIBRATION END NOT ALLOWED.

Can you please give me any idea what went wrong?

Thanx a lot
 
Sort by date Sort by votes
Are you sure you wait 72 hours . Try wait 100 hours and see ..

 
Upvote 0 Downvote
Or may be 73 - 75 hours. Command CACAP will show you when:

cacap;
AUTOMATIC TIME CALIBRATION DATA
CALIBRATION END ALLOWED
CALIBRATION VALID
TIME LAST INITIATED
17:05:00
THU 03 JUL 2003
END
 
Upvote 0 Downvote
Also see topic "configuring md110 clock":

thread806-583204
 
Upvote 0 Downvote
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top