Cable XYplexserver to TIU

[kings1]

Hello all,

I need to extend the cable RPMR 602 3059/xxxxx between XYplex server and TIU panel with linedrivers. In my documentation from trading I can not find the pinlayout from the cable.

Can somebody help me and put the pinlayout here.

Thank you very much!!!!

Kings

 

[Isinor]

Hi Kings1,

This cable is in 3 lengths...
RPMR 602 3059/5000 (5M)
RPMR 602 3059/10000 (10M)
RPMR 602 3059/18000 (18M)

Have you tested a patch cable as from memory I think this is just a straight patch cable. If its not a patch then 2&3 are crossed as are 4&6… I hope

You need the Zyplex doc's (A5 ring bound booklet) for the Zyplex pin outs.

TIU 5602 side Signal
RJ-11 Seen from TIU 5602
pin2 TD (Transmit Data)
pin3 RD (Receive Data)
pin4 CTS (Clear To Send)
pin5 SG (Signal Ground)
pin6 RTS (Request To Send)



Regards
Isinor

 

[SYAR2003]

RPMR 602 3059

[tt]
RJ45 RJ11(TIU)
modular modular
plug 8/8 plug 6/6

1 o---------------o 4
2 o---------------o 1
3 o---------------o 3
4 o---------------o 5
5 o
6 o---------------o 2
7 o---------------o 6
8 o
[/tt]


syar

 

[kings1]

Thanks for the info.

What is the maximum line lenght between XYPlexserver and TIU?

Kings

 

[kings1]

Thanks for the help. It's working now.

 

[SYAR2003]

It's a serial line so as all serial lenght it's
recommended to 20 meters .
Though i have run longer with own made cables of cat5 upto
40m .

syar