Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations strongm on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

Cable from Shoretel to Definity G3r11

Status
Not open for further replies.

grayml

Technical User
Feb 24, 2012
11
US
Hello all,

What would be the colors/pinouts to go from a 25 pair female amphenol on the G3r to an RJ45 on the Shoretel side? What I made up and seems to have problems is:

RJ45 Amphenol
White/Blue Purple/Orange
Blue/White Orange/Purple
White/Orange Purple/Green
Orange/White Green/Purple

Has anyone else had to make up one of these cables?

Thanks!
 
I did have to make this same connection not too long ago. I got it to work using the following pin-outs...
RJ45 - Amphenol
pin 1 -> pin 22
pin 2 -> pin 47
pin 4 -> pin 23
pin 5 -> pin 48

I just spliced a spare Amphenol cable and put an RJ45 on the end, then plugged it into a junction box so I could make the cross-over there. Then the other side of the junction box was a standard T1 cable back to the ShoreTel.

Hope that helps.
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top