Tek-Tips is the largest IT community on the Internet today!
Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!
-
Congratulations SkipVought on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!
Cable for LM2000 1
- Thread starter jkeeper
- Start date
-
1
- #2
Aside from ordering the parts from NAI, you can build the cables yourself, customize the length, etc. you can find the pinouts and specs here:
Starting at page 3/17.
Here are the part numbers I was able to dig up on the cables themselves for SIA/LM2000 use (SIA is the Sniffer Internet Analyzer, back in the DOS days that was what they called it and it kind of stuck in the technical support community after Network General became NAI)
CBL-VCAB-NA-100 - v.35 Y-cable for t1/e1
CBL-R449-NA-100 - RS-449 (422/423) Y-cable for t1/e1
CBL-R232-NA-100 - RS-232 Y-cable
CBL-V10C-NA-100 - v.10/11 Y-cable
These part numbers are old and may have changed, but at least it's a starting point...
Hope this helps,
-Andy
Starting at page 3/17.
Here are the part numbers I was able to dig up on the cables themselves for SIA/LM2000 use (SIA is the Sniffer Internet Analyzer, back in the DOS days that was what they called it and it kind of stuck in the technical support community after Network General became NAI)
CBL-VCAB-NA-100 - v.35 Y-cable for t1/e1
CBL-R449-NA-100 - RS-449 (422/423) Y-cable for t1/e1
CBL-R232-NA-100 - RS-232 Y-cable
CBL-V10C-NA-100 - v.10/11 Y-cable
These part numbers are old and may have changed, but at least it's a starting point...
Hope this helps,
-Andy
- Thread starter
- #3
- Status
Similar threads
- Locked
- Question