cable assignments for the nt8b88 1

[teleres007]

I need the schematic or cable assignments for the nt8b88

 

[aragon]

The module is connected in parallel using the 1st six pairs with the 1st 6 lines on the KSU.
The screw down terminals plug into a station port on the KSU and are polarity sensitive.

 

[teleres007]

In parallel meaning I will take the 25 pr. cable from the nt8b88 and punch it to a 66 block then jumper it to the connecting module for the six lines of the 6x16, on top of the conection from the outside.

 

[aragon]

In parallel in electrical talk like connecting a car battery to boost someone's car. TIP to TIP, RIN to RING for EACH line individually. I think you have the right idea.