Tek-Tips is the largest IT community on the Internet today!

Members share and learn making Tek-Tips Forums the best source of peer-reviewed technical information on the Internet!

  • Congratulations IamaSherpa on being selected by the Tek-Tips community for having the most helpful posts in the forums last week. Way to Go!

C9A0 error code on IBM 7137 dasd subsystem

Status
Not open for further replies.

cspilman

MIS
Nov 17, 2000
307
US
I have an IBM 7137 disk subsystem running RAID 5 that is connected to my E30 running AIX 4.3.2. I have recenlty acquired these boxes as part of the position I hold (systems engineer). Below is the error message that is mailed to the root account:

Wed Dec 27 13:29:19 2000
DriveID = hdisk2
Your DASD subsystem has detected a condition which
requires service soon.
Please call your service representative at your earliest
convenience.
Provide your service representative with the following information: Error Code: C9A0
Unit Type: IBM 7137413
Location: 04-02-00-0,0
Sense Key, Code, Qual: 01, 5D, 00


I wanted to post first before I call IBM service since it is a per incident basis for my company to call them. This is a test server so if we lose the disks it's not as bad as if it was a production system.

My question is this... does anyone know exactly what the error code C9A0 is that is given in the above message? I have searched high and low for some information on this and can't find any. Any information would be appreciated.

Thanks,
Chuck
 
FYI:

I did in fact have to call IBM support for this issue and they stated that is was power supply A that is bad and needs to replaced.

Regards,
Chuck
 
I've got a book with my 7137 that lists the error code -- IBM will supply you with one I would think. A good investment.
Mike
michael.j.lacey@ntlworld.com
 
Status
Not open for further replies.

Part and Inventory Search

Sponsor

Back
Top