C110 with 8.0(30) and SIP woes 1

[kholladay]

Can anyone who is part of the C110/96x1 trial verify a bug that I reported on the PI site causing outbound SIP trunk calls to drop at right around 33 seconds?

Also if possible can you test this with a digital and/or analog set?

Kyle Holladay / IPOfficeHelp.com
ACSS/ACIS/APSS Avaya SME Communications
APDS Avaya Data
MCP/MCTS Exchange 2007/2010
Adtran ATSA, Aruba ACMA

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford

 

[telecomtekperson]

Kyle, I should have time to test today.

I have an IP500 as my home system, and a beta kit with the c110.

When the beta kit is at home, it is the centralized VM Pro.

If i direct calls from the first system to the second, will that be good enough for testing, or do i need to put the c110 in the mail system?

 

[telecomtekperson]

er...main system

 

[kholladay]

Fault seems to be with the R8.0(30) core software and has nothing to do with the C110 itself.

Kyle Holladay / IPOfficeHelp.com
ACSS/ACIS/APSS Avaya SME Communications
APDS Avaya Data
MCP/MCTS Exchange 2007/2010
Adtran ATSA, Aruba ACMA

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford

 

[telecomtekperson]

Ok...

 

[tlpeter]

You aren't lucky with your sip trunks.
I think you have issues every trial


BAZINGA!

I'm not insane, my mother had me tested!

www.lantel.nl

 

[amriddle01]

He will do, as Avaya break SIP trunks in new and inetersting ways with every trial

http://www.ipoffice.tel

 

[hairlessupportmonkey]

Kyle,

can you post a trace of the SIP messages?

I found that if the source ports on the SIP signalling werent correct - i.e 5060 then the calls would terminate after 30 secs due to NAT timers closing the sessions down!

ACSS - SME
General Geek

 

[telecomtekperson]

Yup, did it for me to.
Outbound is fine. Inbound drops at 30 seconds.

I am using Flowroute.com for SIP.

 

[kholladay]

It runs fine on 8.0.16 but not on 8.0.30. I have upgraded and downgraded 3 times and every time it goes right back to working brilliantly on 8.0.16 but outbound breaks at the 33 seconds mark on 8.0(30) every time.

Kyle Holladay / IPOfficeHelp.com
ACSS/ACIS/APSS Avaya SME Communications
APDS Avaya Data
MCP/MCTS Exchange 2007/2010
Adtran ATSA, Aruba ACMA

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford

 

[hairlessupportmonkey]

Hmmm... log a bug on the PI site?

ACSS - SME
General Geek

 

[kholladay]

Done. And I got a buddy to validate that the issue is there with Digital and analog sets as well.

Kyle Holladay / IPOfficeHelp.com
ACSS/ACIS/APSS Avaya SME Communications
APDS Avaya Data
MCP/MCTS Exchange 2007/2010
Adtran ATSA, Aruba ACMA

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford

 

[tlpeter]

I have other issues.

I cannot put back a backup from 1XP at all
And second, i cannot use user variables because i when i pull the vmpro database to the client, all the user variables are empty.


BAZINGA!

I'm not insane, my mother had me tested!

www.lantel.nl

 

[biv343]

I have the user variable issue on the 8.0 GA release when running Linux VM Pro. Works fine on the Windows version, but the variables magically disappear on the Linux version.

 

[kholladay]

Found out that so long as the C110 is inserted into the 500 it will be the VM server. You can change the IP and reboot but when it comes back up it changes the IP of the VM server back to 169.250.0.2.

Took me a bit to figure that out after I downgraded.

Kyle Holladay / IPOfficeHelp.com
ACSS/ACIS/APSS Avaya SME Communications
APDS Avaya Data
MCP/MCTS Exchange 2007/2010
Adtran ATSA, Aruba ACMA

"Thinking is the hardest work there is, which is the probable reason why so few engage in it." - Henry Ford

 

[tlpeter]

I took it out.
I cannot do without the user variables.
The old vm and 1XP is running again.


BAZINGA!

I'm not insane, my mother had me tested!

www.lantel.nl

 

[amriddle01]

I see a delayed (again) product release on the horizon

http://www.ipoffice.tel