tfcallahan1
Programmer
Hello,
I have a Clipper 5.2e application linked with Blinker 7.0.
It was previously linked with EXOSPACE but we have recently converted to Blinker.
A variety of 3rd party libraries are used but the Blinker docs say they are compatable.
After converting to Blinker, the program abruptly shuts down in various places with no error message. The program just exits.
It *might* be related to wait states but that is unclear.
Can anyone provide any insight or suggestions?
My link script is below.
Thanks in advance,
Tim
LINK SCRIPT
---------------------
# No incremental linking - need overlays in debug and production modes
BLINKER INCREMENTAL OFF
# Burn in Clipper environment variables
BLINKER EXECUTABLE CLIPPER F:160
# Set default cache sizes
BLINKER CACHE XMS 1024,50%
BLINKER CACHE EMS 256,50%
# Compression
# 1 = most compression, 9 = most speed
BLINKER EXECUTABLE COMPRESS 5
BLINKER EXECUTABLE EXTENDED
#BLINKER EXECUTABLE DUAL
# change procedure depth to 100 to increase the stack size - each 50 is approx 5120 bytes. Comix needs 7128 at least.
BLINKER PROCEDURE DEPTH 100 # Set a suitable stack depth
# Overlay pool - increase to reduce disk traffic, decrease to reduce memory footprint
BLINKER OVERLAY OPSIZE 50 # Set the overlay pool to 50kb
# Save the EXE even if unresolved externals
BLINKER EXECUTABLE NODELETE
# No blinking eyes during link
BLINKER MESSAGE NOBLINK
# no beep when done linking
NOBELL
# Uncomment below to generate link map file
MAP S, A, X
BEGINAREA
# Program object files.
FILE de_main
FILE jtcfg
FILE jtdict
FILE jtdicttm
FILE jtdictin
FILE jtstrux
FILE jtmisc
FILE jtmiscx
FILE jtpcemul
FILE jtpcl
FILE utilcomm
FILE de_rug
FILE de_tarea
FILE de_tyarn
FILE rp_ypcrd
FILE de_cont
FILE de_clink
FILE de_trans
FILE de_proj
FILE de_cash
FILE de_cust
FILE de_emp
FILE de_esch
FILE de_hours
FILE de_order
FILE de_sampl
FILE de_prod
FILE de_misc
FILE de_user
FILE de_yarn
FILE de_ship
FILE de_hrtot
FILE de_cmnt
FILE de_arbal
FILE de_bonus
FILE de_yrns
FILE de_comp
FILE de_cmlnk
FILE de_cmsn
FILE de_tax
FILE de_quote
FILE de_qline
FILE de_patt
FILE de_ac
FILE de_pasg
FILE de_pclk
FILE de_rcmp
FILE rp_match
FILE rp_label
FILE miscpick
FILE utils
FILE yarnutil
FILE exputil
FILE procutil
FILE ordutil
FILE de_inv
FILE de_invtx
FILE de_dsgn
FILE de_cimp
FILE de_valid
FILE de_cie
FILE rpbinsht
FILE rpflwup
FILE rpwalk
FILE rpactbud
FILE rpordack
FILE rpordinv
FILE rpordcrd
FILE rp_yscrd
FILE rp_jc_yc
FILE rpyrnfrt
FILE rpredye
FILE rpyrnord
FILE rpclrapr
FILE rptrans
FILE jtfind
FILE jttext
FILE rpordfrm
FILE rpquote
FILE rppcklst
FILE barcode
FILE rpshprel
FILE rp_wbcrd
FILE rpsamack
FILE rpyrnlbl
FILE rpveninv
FILE de_ylot
FILE de_ycst
FILE de_yspc
FILE de_yord
FILE de_cost
FILE de_bin
FILE yarnproc
FILE rpproj
FILE rparray
# OSLIB operating system library
LIB \jt_dev\cl5\oslib\lib\oslib.lib
# Nanforum Toolkit
LIB \jt_dev\cl5\nanfor\nanforx, \jt_dev\cl5\nanfor\nanfor
# Job Trac common library
LIB \jt_dev\lib\jtlib.lib
# Overlay utility library
ALLOCATE \jt_dev\cl5\overlay\overcl
# Pro HP printing library
LIB \jt_dev\cl5\prohp\prohp520.lib
# Mouse lib
lib \jt_dev\cl5\super\super
# LFN
lib \jt_dev\cl5\lfn\ll
lib \jt_dev\cl5\lfn\lfn
lib \jt_dev\cl5\nanfor\cpmi
# PSERROR error handling and reporting library
FILE \jt_dev\cl5\pserror\psx52.obj
LIB \jt_dev\cl5\pserror\psebasic, \jt_dev\cl5\pserror\compat
FILE \jt_dev\cl5\comix\cmx.obj
FILE \jt_dev\cl5\comix\cmxdbt.obj
LIB \jt_dev\cl5\comix\cmx.lib
ENDAREA
# Overlay
FILE \jt_dev\cl5\overlay\resident.obj
# This is the standard COMIX non-overlayed recommendations for speed
MODULE lsNew
MODULE item
MODULE _buffer
MODULE _codeBlo
MODULE cmxDos
MODULE _rdd
MODULE _ti
MODULE _orderBa
MODULE _cdx
MODULE CdxLock
MODULE CdxIter
MODULE _order
MODULE _cdxTag
MODULE _cdxPage
MODULE _cdxLeaf
MODULE list
MODULE cmxDbf1
MODULE cmxFpt
MODULE cmxLock
MODULE tiOpt
MODULE BinVal
MODULE cmxDbt52
MODULE oInsert
MODULE cdxNew
MODULE _rg
MODULE _table
MODULE cmxKeyNo # cmxKeyNo(), cmxKeyCount()
MODULE cmxKeyVa # cmxKeyVal()
MODULE cmxSkipU # cmxSkipUnique()
MODULE ordScope # Steady-state scope checking
MODULE cmxTable # Support routines for all cmx*() functions
MODULE lsExtend # Support routines for all cmx*() functions
# Blinker Library
SEARCH BLXCLP52
// MIN overlaying for CLIPPER STUFF
mod tbrowse0 # Uncomment these three lines
mod tbrowse1 # to speed up TBROWSE by forcing
mod linelen # it into the root.
mod gt # Do not overlay because of PSERROR
mod outstd # Do not overlay because of PSERROR
mod errsys1 # Do not overlay because of PSERROR
lib clipper
beginarea
lib extend
endarea
lib terminal
# Executable file
OUTPUT \jt_dev\exe\jt_all.exe
I have a Clipper 5.2e application linked with Blinker 7.0.
It was previously linked with EXOSPACE but we have recently converted to Blinker.
A variety of 3rd party libraries are used but the Blinker docs say they are compatable.
After converting to Blinker, the program abruptly shuts down in various places with no error message. The program just exits.
It *might* be related to wait states but that is unclear.
Can anyone provide any insight or suggestions?
My link script is below.
Thanks in advance,
Tim
LINK SCRIPT
---------------------
# No incremental linking - need overlays in debug and production modes
BLINKER INCREMENTAL OFF
# Burn in Clipper environment variables
BLINKER EXECUTABLE CLIPPER F:160
# Set default cache sizes
BLINKER CACHE XMS 1024,50%
BLINKER CACHE EMS 256,50%
# Compression
# 1 = most compression, 9 = most speed
BLINKER EXECUTABLE COMPRESS 5
BLINKER EXECUTABLE EXTENDED
#BLINKER EXECUTABLE DUAL
# change procedure depth to 100 to increase the stack size - each 50 is approx 5120 bytes. Comix needs 7128 at least.
BLINKER PROCEDURE DEPTH 100 # Set a suitable stack depth
# Overlay pool - increase to reduce disk traffic, decrease to reduce memory footprint
BLINKER OVERLAY OPSIZE 50 # Set the overlay pool to 50kb
# Save the EXE even if unresolved externals
BLINKER EXECUTABLE NODELETE
# No blinking eyes during link
BLINKER MESSAGE NOBLINK
# no beep when done linking
NOBELL
# Uncomment below to generate link map file
MAP S, A, X
BEGINAREA
# Program object files.
FILE de_main
FILE jtcfg
FILE jtdict
FILE jtdicttm
FILE jtdictin
FILE jtstrux
FILE jtmisc
FILE jtmiscx
FILE jtpcemul
FILE jtpcl
FILE utilcomm
FILE de_rug
FILE de_tarea
FILE de_tyarn
FILE rp_ypcrd
FILE de_cont
FILE de_clink
FILE de_trans
FILE de_proj
FILE de_cash
FILE de_cust
FILE de_emp
FILE de_esch
FILE de_hours
FILE de_order
FILE de_sampl
FILE de_prod
FILE de_misc
FILE de_user
FILE de_yarn
FILE de_ship
FILE de_hrtot
FILE de_cmnt
FILE de_arbal
FILE de_bonus
FILE de_yrns
FILE de_comp
FILE de_cmlnk
FILE de_cmsn
FILE de_tax
FILE de_quote
FILE de_qline
FILE de_patt
FILE de_ac
FILE de_pasg
FILE de_pclk
FILE de_rcmp
FILE rp_match
FILE rp_label
FILE miscpick
FILE utils
FILE yarnutil
FILE exputil
FILE procutil
FILE ordutil
FILE de_inv
FILE de_invtx
FILE de_dsgn
FILE de_cimp
FILE de_valid
FILE de_cie
FILE rpbinsht
FILE rpflwup
FILE rpwalk
FILE rpactbud
FILE rpordack
FILE rpordinv
FILE rpordcrd
FILE rp_yscrd
FILE rp_jc_yc
FILE rpyrnfrt
FILE rpredye
FILE rpyrnord
FILE rpclrapr
FILE rptrans
FILE jtfind
FILE jttext
FILE rpordfrm
FILE rpquote
FILE rppcklst
FILE barcode
FILE rpshprel
FILE rp_wbcrd
FILE rpsamack
FILE rpyrnlbl
FILE rpveninv
FILE de_ylot
FILE de_ycst
FILE de_yspc
FILE de_yord
FILE de_cost
FILE de_bin
FILE yarnproc
FILE rpproj
FILE rparray
# OSLIB operating system library
LIB \jt_dev\cl5\oslib\lib\oslib.lib
# Nanforum Toolkit
LIB \jt_dev\cl5\nanfor\nanforx, \jt_dev\cl5\nanfor\nanfor
# Job Trac common library
LIB \jt_dev\lib\jtlib.lib
# Overlay utility library
ALLOCATE \jt_dev\cl5\overlay\overcl
# Pro HP printing library
LIB \jt_dev\cl5\prohp\prohp520.lib
# Mouse lib
lib \jt_dev\cl5\super\super
# LFN
lib \jt_dev\cl5\lfn\ll
lib \jt_dev\cl5\lfn\lfn
lib \jt_dev\cl5\nanfor\cpmi
# PSERROR error handling and reporting library
FILE \jt_dev\cl5\pserror\psx52.obj
LIB \jt_dev\cl5\pserror\psebasic, \jt_dev\cl5\pserror\compat
FILE \jt_dev\cl5\comix\cmx.obj
FILE \jt_dev\cl5\comix\cmxdbt.obj
LIB \jt_dev\cl5\comix\cmx.lib
ENDAREA
# Overlay
FILE \jt_dev\cl5\overlay\resident.obj
# This is the standard COMIX non-overlayed recommendations for speed
MODULE lsNew
MODULE item
MODULE _buffer
MODULE _codeBlo
MODULE cmxDos
MODULE _rdd
MODULE _ti
MODULE _orderBa
MODULE _cdx
MODULE CdxLock
MODULE CdxIter
MODULE _order
MODULE _cdxTag
MODULE _cdxPage
MODULE _cdxLeaf
MODULE list
MODULE cmxDbf1
MODULE cmxFpt
MODULE cmxLock
MODULE tiOpt
MODULE BinVal
MODULE cmxDbt52
MODULE oInsert
MODULE cdxNew
MODULE _rg
MODULE _table
MODULE cmxKeyNo # cmxKeyNo(), cmxKeyCount()
MODULE cmxKeyVa # cmxKeyVal()
MODULE cmxSkipU # cmxSkipUnique()
MODULE ordScope # Steady-state scope checking
MODULE cmxTable # Support routines for all cmx*() functions
MODULE lsExtend # Support routines for all cmx*() functions
# Blinker Library
SEARCH BLXCLP52
// MIN overlaying for CLIPPER STUFF
mod tbrowse0 # Uncomment these three lines
mod tbrowse1 # to speed up TBROWSE by forcing
mod linelen # it into the root.
mod gt # Do not overlay because of PSERROR
mod outstd # Do not overlay because of PSERROR
mod errsys1 # Do not overlay because of PSERROR
lib clipper
beginarea
lib extend
endarea
lib terminal
# Executable file
OUTPUT \jt_dev\exe\jt_all.exe